taskSavannah Administration - Tasks: task #11863, Submission of...

 
 

task #11863: Submission of Awesome-Arduino-AlarmClock

Submitted by:  Roland <alarmclockwizard>
Submitted on:  Fri 24 Feb 2012 12:28:28 AM UTC  
 
Should Start On: Fri 24 Feb 2012 12:00:00 AM UTCShould be Finished on: Mon 05 Mar 2012 12:00:00 AM UTC
Category: Project ApprovalPriority: 5 - Normal
Status: CancelledPrivacy: Public
Percent Complete: 0%Assigned to: None
Open/Closed: ClosedEffort: 0.00

Add a New Comment (Rich MarkupRich Markup):
   

You are not logged in

Please log in, so followups can be emailed to you.

 

Sun 25 Mar 2012 10:54:49 PM UTC, comment #2:

Hi mjflick,

thanks for your review.

You don`t need an build script to compile and upload the code. The AlarmClockDesk.ino serves as "startup file" for the project. You have to unzip the appended sketchbook_2.tar.gz into your home directory so that all files are placed in an directory named sketchbook. After the extraction you should be able to open the project by starting the Arduino-IDE (version 1.0 or newer) and
select "File|Sketchbook|AlarmClockDesk". This should open the project along with all included files. The project needs an Arduino Mega 2560 board to run. But you can compile the code by first select the target board via "Tools|Boards|Arduino
Mega 2560 or Mega ADK" and than compile the code with "Sketch|Verify/Compile". The Arduino-IDE will than use avr-gcc to compile the code (http://arduino.cc/en/Hacking/BuildProcess).

I don`t know how to handle your request to add copyright notices and permission-to-copy statements to the appended library files. The ADS7846 library which drives the display for example is part of the msd-shield_v020.zip library which is supplied by the hardware vendor of the used msd-shield. This library also includes DS1307, MI0283QT2, SDcard and digitalWriteFast. I think the license of these files (included in the archive) allows to add such permission statements but i`m not sure. The other libraries are structured equally. Would it help if i would not include the archive files and library code directly in the
project but only supply links to the download urls?

Regarding the "COPYING" file. I included one in the top directory of sketchbook_2.tar.gz. Was this correct or should i change it?

I hope could answered some of you questions and help you with the further review of the project.

servus,
roland

Roland <alarmclockwizard>
Sun 25 Mar 2012 06:42:22 PM UTC, comment #1:

Hi,

I'm reviewing your project and have a few questions. First, how do I compile this, is there a build script?

Also, can this be compiled with GCC?

That aside, a number of files in the project, ADS7846.cpp for example, do not contain licensing headers.

In order to release your project properly and unambiguously under the GNU GPL, please place copyright notices and permission-to-copy statements at the beginning of every copyrightable file, usually any file more than 10 lines long.

In addition, if you haven't already, please include a copy of the plain text version of the GPL, available from http://www.gnu.org/licenses/gpl.txt, into a file named "COPYING".

For more information, see http://www.gnu.org/licenses/gpl-howto.html.

If some of your files cannot carry such notices (e.g. binary files), then you can add a README file in the same directory containing the copyright and license notices. Check http://www.gnu.org/prep/maintain/html_node/Copyright-Notices.html for further information.

The GPL FAQ explains why these procedures must be followed. To learn why a copy of the GPL must be included with every copy of the code, for example, see http://www.gnu.org/licenses/gpl-faq.html#WhyMustIInclude.

If you are willing to make the changes mentioned above, please provide us with an URL to an updated tarball of your project. Upon review, we will reconsider your project for inclusion in Savannah.

To help us better keep track of your registration, please use the tracker's web interface by following the link below. Do not reply directly; the registration process is not driven by e-mail, and we will not receive such replies.

Regards.

Michael J. Flickinger <mjflick>
Site Administrator
Fri 24 Feb 2012 12:28:28 AM UTC, original submission:

A new project has been registered at Savannah
This project account will remain inactive until a site admin approves or discards the registration.

Registration Administration

While this item will be useful to track the registration process, approving or discarding the registration must be done using the specific Group Administration page, accessible only to site administrators, effectively logged as site administrators (superuser):

Registration Details

  • Name: Awesome-Arduino-AlarmClock
  • System Name: aaalarmclock
  • Type: non-GNU software & documentation
  • License: GNU General Public License v2 or later

Description:

The propose of this project is to create full featured arduino based alarm clock. It consists of two parts. The desk unit which is the brain of the alarm clock and an wall unit which serves as an big time and alarm display. Both units are connected by an wireless zigbee connection.

The desk unit features things like multiple alarm times and alarms (radio, blinking light, buzzer, beeping sound). It is equipped with an radio controlled clock, light sensor for display dimming depending on the sleeping room brightness, snozze buttons, and various other sensors. Each day of the week can have an unique alarm time schedule which is saved on an SD card. So even an short blackout can`t stop it.

Other Software Required:

Arduino-Library-Tone + GNU GPL v3 + http://rogue-code.googlecode.com/files/Arduino-Library-Tone.zip
arduino-dcf77-clock-0.2.1 + GNU GPL v2 + http://gonium.net/md/2007/01/06/arduino-dcf77-v02-released/index.html
MsTimer2 + LGPL + http://arduino.cc/playground/Main/MsTimer2
msd-shield_v020 + specific + http://www.watterott.net/msd-shield/msd-shield_v020.zip
Si4703_Breakout + Beerware + http://srmonk.blogspot.com/2011/09/sparkfun-si4703-fm-receiver-breakout.html
digitalwritefast + GNU GPL v3 + http://code.google.com/p/digitalwritefast/

Tarball URL:

http://savannah.gnu.org/submissions_uploads/sketchbook_2.tar.gz

Roland <alarmclockwizard>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach File(s):
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

Carbon-Copy List
  • -unavailable- added by jllledo (Updated the item)
  • -unavailable- added by mjflick (Posted a comment)
  • -unavailable- added by alarmclockwizard (Submitted the item)
  •  

    Do you think this task is very important?
    If so, you can click here to add your encouragement to it.
    This task has 0 encouragements so far.

    Only logged-in users can vote.

     

    Please enter the title of George Orwell's famous dystopian book (it's a date):

     

     

    Follow 2 latest changes.

    Date Changed By Updated Field Previous Value => Replaced By
    Tue 19 Nov 2013 09:55:52 PM UTCjllledoStatusNone=>Cancelled
      Open/ClosedOpen=>Closed

    Back to the top


    Powered by Savane 3.1-cleanup