# Simplified Chinese translation
# Copyright (C) 2000 Simon Baldwin
# This file is distributed under the same license as the gtypist package.
# Wei Mingzhi <weimzh@xuite.net>, 2006, 2012.
#
msgid ""
msgstr ""
"Project-Id-Version: GNU Typist 2.6\n"
"Report-Msgid-Bugs-To: bug-gtypist@gnu.org\n"
"POT-Creation-Date: 2012-02-09 16:05+0000\n"
"PO-Revision-Date: 2012-05-20 21:27+0800\n"
"Last-Translator: Wei Mingzhi <whistler_wmz@users.sf.net>\n"
"Language-Team: Simplified Chinese\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: src/gtypist.c:287
#: src/script.c:56
msgid "internal error: strdup"
msgstr "内部错误: strdup"

#: src/gtypist.c:464
msgid "invalid key binding"
msgstr "无效的按键绑定"

#: src/gtypist.c:466
msgid "invalid function key number"
msgstr "无效的功能键编号"

#: src/gtypist.c:504
#: src/gtypist.c:611
#: src/gtypist.c:897
msgid "data exceeds screen length"
msgstr "数据超出屏幕宽度"

#: src/gtypist.c:547
msgid "instructions are limited to two lines"
msgstr "指令只限二行"

#: src/gtypist.c:805
#: src/gtypist.c:1076
#: src/script.c:313
msgid "internal error: fseek"
msgstr "内部错误: fseek"

#: src/gtypist.c:1398
#, no-c-format
msgid "'*' must immediately follow '%'"
msgstr "'*' 必须立即接着 '%'"

#: src/gtypist.c:1401
#: src/gtypist.c:1404
#, no-c-format
msgid "missing '%'"
msgstr "缺少 '%'"

#: src/gtypist.c:1408
#, no-c-format
msgid "'%' must immediately follow value"
msgstr "'%' 必须立即接着值"

#: src/gtypist.c:1417
msgid "overflow in do_error_max_set"
msgstr "在 do_error_max_set 中溢出"

#: src/gtypist.c:1437
msgid "Invalid value for \"E:\" (out of range)"
msgstr "\"E:\" 的值无效 (超出范围)"

#: src/gtypist.c:1492
#: src/script.c:307
#, c-format
msgid "label '%s' not found"
msgstr "标签 '%s' 没找到"

#: src/gtypist.c:1558
msgid "unknown command"
msgstr "未知的命令"

#: src/gtypist.c:1676
msgid "track personal best typing speeds"
msgstr "跟踪个人最佳打字速度成绩"

#: src/gtypist.c:1677
msgid "default maximum error percentage (default 3.0); valid values are between 0.0 and 100.0"
msgstr "默认最大的错误百分比 (默认为 3.0); 有效值在 0.0 和 100.0 之间"

#: src/gtypist.c:1679
msgid "turn off WPM timer in drills"
msgstr "在训练中关闭每分钟字数计时器"

#: src/gtypist.c:1680
msgid "use the terminal's hardware cursor"
msgstr "使用终端硬件光标"

#: src/gtypist.c:1681
msgid "cursor flash period P*.1 sec (default 10); valid  values are between 0 and 512; this is ignored if -t is specified"
msgstr "光标闪烁周期 P * 0.1 秒 (默认为 10); 有效值在 0 和 512 之间; 若 -t 参数被指定, 则这个值将被忽略"

#: src/gtypist.c:1683
msgid "set initial display colours where available"
msgstr "设置可用的初始显示颜色"

#: src/gtypist.c:1684
msgid "don't beep on errors"
msgstr "当错误发生时不响铃"

#: src/gtypist.c:1685
msgid "same as -s, --silent"
msgstr "和 -s, --silent 相同"

#: src/gtypist.c:1686
msgid "start the lesson at label 'L'"
msgstr "由标签 'L' 的课程开始"

#: src/gtypist.c:1687
msgid "try to mimic word processors"
msgstr "试图模拟字处理软件"

#: src/gtypist.c:1688
msgid "forbid the user to skip exercises"
msgstr "禁止使用者跳过练习"

#: src/gtypist.c:1689
msgid "highlight errors with reverse video"
msgstr "高亮显示错误"

#: src/gtypist.c:1690
msgid "print this message"
msgstr "打印此消息"

#: src/gtypist.c:1691
msgid "output version information and exit"
msgstr "输出版本信息然后退出"

#: src/gtypist.c:1692
msgid "do not ask confirmation questions"
msgstr "不要问确认问题"

#: src/gtypist.c:1693
msgid "set top banner colours (background, foreground, package and version respectively)"
msgstr "设置屏幕上方的广告条颜色 (分别为背景，前景，包和版本)。"

#: src/gtypist.c:1695
msgid "set scoring mode (words per minute or characters per minute)"
msgstr "设置计分模式 (每分钟词数或每分钟字符数)"

#: src/gtypist.c:1699
#, c-format
msgid ""
"`gtypist' is a typing tutor with several lessons for different keyboards and languages.  New lessons can be written by the user easily.\n"
"\n"
msgstr "'gtypist' 是一款打字教程软件，支持不同的键盘和语言。新的课程可以由用户很容易的制作出来。\n"

#: src/gtypist.c:1703
msgid "Usage"
msgstr "用法"

#: src/gtypist.c:1703
msgid "options"
msgstr "选项"

#: src/gtypist.c:1703
msgid "script-file"
msgstr "脚本文件"

#: src/gtypist.c:1704
msgid "Options"
msgstr "选项"

#: src/gtypist.c:1711
#, c-format
msgid ""
"\n"
"If not supplied, script-file defaults to '%s/%s'.\n"
msgstr ""
"\n"
"如果没有提供，默认脚本文件为 '%s/%s'.\n"

#: src/gtypist.c:1713
#, c-format
msgid ""
"The path $GTYPIST_PATH is searched for script files.\n"
"\n"
msgstr ""
"从路径 $GTYPIST_PATH 中搜索脚本文件。\n"
"\n"

#: src/gtypist.c:1715
msgid "Examples"
msgstr "例子"

#: src/gtypist.c:1717
msgid "To run the default lesson in english `gtypist.typ'"
msgstr "以默认的英语方式 `gtypist.typ' 进行课程"

#: src/gtypist.c:1719
msgid "To run the lesson in spanish"
msgstr "以西班牙语方式进行课程"

#: src/gtypist.c:1721
msgid "To instruct gtypist to look for lesson `bar.typ' in a non standard directory"
msgstr "让 gtypist 在一个非标准目录中查找课程 `bar.typ'。"

#: src/gtypist.c:1724
msgid "To run the lesson in the file `test.typ' of directory `temp', starting at label `TEST1', using the terminal's cursor, and run silently"
msgstr "要进行目录 `temp' 下的文件 `test.typ' 中的课程，从标签 `TEST1' 开始，使用终端光标，并且使用安静模式。"

#: src/gtypist.c:1727
msgid "Report bugs to bug-gtypist@gnu.org"
msgstr "将错误报告给 bug-gtypist@gnu.org "

#: src/gtypist.c:1776
#, c-format
msgid "%s: invalid error-max value\n"
msgstr "%s: 无效的 error-max 值\n"

#: src/gtypist.c:1792
#, c-format
msgid "%s: invalid curs-flash value\n"
msgstr "%s: 无效的 curs-flash 值\n"

#: src/gtypist.c:1803
#, c-format
msgid "%s: invalid colours value\n"
msgstr "%s: 不正确的颜色值\n"

#: src/gtypist.c:1813
#, c-format
msgid "%s:  argument format is incorrect\n"
msgstr "%s:  参数格式不正确\n"

#: src/gtypist.c:1823
#, c-format
msgid "%s:  incorrect colour values\n"
msgstr "%s:  不正确的颜色值\n"

#: src/gtypist.c:1832
#: src/gtypist.c:1845
#, c-format
msgid "%s: invalid scoring mode"
msgstr "%s: 不合法的计分模式"

#: src/gtypist.c:1858
#, c-format
msgid "%s: internal error: malloc\n"
msgstr "%s: 内部错误: malloc\n"

#: src/gtypist.c:1879
msgid "Written by Simon Baldwin"
msgstr "作者 Simon Baldwin"

#: src/gtypist.c:1888
#: src/gtypist.c:1895
#, c-format
msgid "Try '%s --help' for more information.\n"
msgstr "打 '%s --help' 可得到更多的信息.\n"

#: src/gtypist.c:1970
msgid ""
"Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Simon Baldwin.\n"
"Copyright (C) 2003, 2004, 2008, 2011, 2012 GNU Typist Development Team.\n"
"This program comes with ABSOLUTELY NO WARRANTY; for details\n"
"please see the file 'COPYING' supplied with the source code.\n"
"This is free software, and you are welcome to redistribute it\n"
"under certain conditions; again, see 'COPYING' for details.\n"
"This program is released under the GNU General Public License."
msgstr ""
"版权所有 (c) 1998, 1999, 2000, 2001, 2002, 2003 Simon Baldwin.\n"
"版权所有 (c) 2003, 2004, 2008, 2011, 2012 GNU Typist Development Team.\n"
"本软件没有任何保证; 详情请参看源码包中的 'COPYING' 文件。\n"
"本程序是自由软件，您可以在一定的条款下传播。请参看 COPYING\n"
"文件。本程序在 GNU 一般公众许可证下发布。"

#: src/gtypist.c:1978
msgid " Tutorial "
msgstr "   教程   "

#: src/gtypist.c:1980
msgid "  Query   "
msgstr "   查询   "

#: src/gtypist.c:1982
msgid "  Drill   "
msgstr "   操练   "

#: src/gtypist.c:1984
msgid "Speed test"
msgstr "速度测验"

#: src/gtypist.c:1986
msgid " Press RETURN or SPACE to continue, ESC to return to the menu "
msgstr " 按回车键或空格键继续。ESC 键返回至菜单。"

#: src/gtypist.c:1989
#, c-format
msgid " Your error-rate is too high. You have to achieve %.1f%%. "
msgstr "您的错误率太高了. 您必须达到 %.1f%%."

#: src/gtypist.c:1993
#, c-format
msgid " You failed this test, so you need to go back to %s. "
msgstr "您没有通过此次测验, 所以您必须回到 %s"

#: src/gtypist.c:1997
msgid " Press R to repeat, N for next exercise or E to exit "
msgstr "按 R 重复一次, 按 N 进入下一个练习或按 E 退出"

#: src/gtypist.c:2001
msgid " Press R to repeat or E to exit "
msgstr "按 R 重复一次或按 E 退出"

#: src/gtypist.c:2004
msgid " Are you sure you want to exit this lesson? [Y/N] "
msgstr "您确定要退出此课程吗? [Y/N]"

#: src/gtypist.c:2008
msgid " Sorry, gtypist is configured to forbid skipping exercises. "
msgstr "抱歉, gtypist 目前设定为禁止跳过课程。"

#: src/gtypist.c:2013
msgid "Y/N"
msgstr "Y/N"

#: src/gtypist.c:2023
msgid "R/N/E"
msgstr "R/N/E"

#: src/gtypist.c:2086
msgid "can't find or open file"
msgstr "找不到或无法打开文件"

#: src/gtypist.c:2101
#, c-format
msgid "%s: %s environment variable not set\n"
msgstr "%s: %s 环境变量未设置\n"

#: src/gtypist.c:2153
msgid "Loading the script..."
msgstr "正在调入脚本文件"

#: src/gtypist.c:2200
#: src/gtypist.c:2217
#: src/gtypist.c:2233
#: src/gtypist.c:2275
#: src/gtypist.c:2292
#: src/script.c:142
#: src/script.c:166
#: src/script.c:256
msgid "internal error: malloc"
msgstr "内部错误: malloc"

#: src/gtypist.c:2284
msgid "internal error: fopen"
msgstr "内部错误: fopen"

#: src/cursmenu.c:324
msgid "Use arrowed keys to move around, SPACE or RETURN to select and ESCAPE to go back"
msgstr "使用光标键移动，空格键或回车键选择，ESC 键后退"

#: src/error.c:51
msgid "line"
msgstr "行"

#: src/script.c:158
msgid "label contains space"
msgstr "标签包含空格"

#: src/script.c:184
msgid "label redefinition"
msgstr "标签重定义"

#: src/script.c:228
msgid "Invalid multibyte sequence (wrong encoding?)"
msgstr "非法的多字节序列 (错误的字符编码?)"

#: src/script.c:230
msgid "data shortage"
msgstr "数据不足"

#: src/script.c:232
msgid "missing ':'"
msgstr "缺少 ':'"

#: src/script.c:238
msgid "line too long for screen"
msgstr "行长度超过屏幕可容纳宽度"

#: src/script.c:330
#: src/script.c:334
#, c-format
msgid ""
"Happy Typing!\n"
"\n"
msgstr ""
"祝您打字愉快!\n"
"\n"

#: src/utf8.c:61
msgid "couldn't convert UTF-8 to wide characters"
msgstr "无法将 UTF-8 转换为宽字符"

#: src/utf8.c:172
msgid "error in setcchar()"
msgstr "setcchar() 错误"

#. TRANSLATORS: This message must not exceed 76 characters (UTF-8 code
#. points, actually) wide or it will display incorrectly on an 80-character
#. wide terminal.
#: src/infoview.c:95
msgid ""
"Welcome to GNU Typist!\n"
"\n"
"This message is meant to get you started using gtypist. Please read the\n"
"manual (at http://www.gnu.org/software/gtypist/doc/, or type \"info gtypist\")\n"
"for more in-depth information!\n"
"\n"
"Use the arrow keys or PGUP/PGDN to scroll this window, SPACE/ENTER to start\n"
"using gtypist, or ESCAPE use gtypist and never show this dialog again.\n"
"\n"
"There are two types of typing exercises: \"drills\" and \"speed tests\". In a\n"
"\"drill\", gtypist displays text in every other line on the screen and waits\n"
"for the user to correctly type the exact same text in the intermediate\n"
"lines. In a \"speed test\", gtypist displays text on the screen and waits\n"
"for the user to correctly type the exact same text over the top.\n"
"\n"
"In both exercise types, you have to repeat the test if your error percentage\n"
"is higher than a maximum error percentage. The default is 3%, but if this is\n"
"too difficult you can change it by running gtypist with the \"-e <maxpct>\"\n"
"command-line option.\n"
"\n"
"On most X11-based terminal emulators you can use Ctrl--/Ctrl-+ to resize the\n"
"terminal window. On Windows, change the properties of the terminal window by\n"
"clicking on the top left corner of the window and choosing 'Properties'.\n"
"\n"
"Several typing courses are available from the main menu. As well as the\n"
"\"QWERTY\" courses, lessons are also available for other keyboard layouts,\n"
"such as Dvorak and Colemak, and numeric keypads. There are also other\n"
"lessons, besides the ones available on the main menu. To see a list of the\n"
"other lessons, select \"More lessons...\" from the main menu. To use one\n"
"of these other lessons, run gtypist with the name of the lesson file as a\n"
"command-line argument. See the comments at the top of each .typ file for\n"
"more information about the source and the author of the lessons. If you want\n"
"to write your own lessons, look at the gtypist manual, it's really simple!\n"
"\n"
"If you have any questions about GNU Typist, please write to the gtypist\n"
"mailing list at <bug-gtypist@gnu.org>."
msgstr ""
"欢迎使用 GNU Typist!\n"
"\n"
"此信息将引导您开始使用 gtypist。要获取更多详细信息，请阅读使用手册 (可在\n"
"http//www.gnu.org/software/gtypist/doc/ 找到, 或使用 \"info gtypist\")。\n"
"\n"
"使用方向键或 PGUP/PGDN 滚动此窗口，空格键/回车键开始使用 gtypist，\n"
"或按 Esc 开始使用 gtypist 且不再显示此对话框。\n"
"\n"
"有两种类型的练习可供使用：\"操练\" 和 \"速度测试\"。在 \"操练\" 模式下，\n"
"gtypist 将在屏幕上显示一行文字并等待用户正确打出这行文字。在 \"速度测试\"\n"
"模式下，gtypist 将在屏幕上显示一篇文章并等待用户正确打出全部内容。\n"
"\n"
"无论在哪种模式下，如果您的错误率高于某一限值，您需要重复进行测试。默认限值\n"
"是 3%，但是如果此限值过于困难，您可以使用 \"-e <maxpct>\" 命令行参数更改。\n"
"\n"
"在大多数基于 X11 的终端模拟器，您可以使用 Ctrl--/Ctrl-+ 改变终端窗口的大小。在\n"
"Windows 下，可单击窗口左上角的图标并选择 '属性' 来改变窗口属性。\n"
"\n"
"若干个打字课程可在主菜单选用。除 \"QWERTY\" 课程，适用其它键盘布局的课程\n"
"亦可用，如 Dvorak 及 Colemak 键盘，以及数字小键盘。除主菜单显示的课程外，\n"
"gtypist 同时提供了一些其它的课程。如要查看其它课程的列表，请在主菜单选择\n"
"\"更多课程...\"。如要使用其它课程，使用命令行参数指定课程文件名。请参考各\n"
".typ 文件的注释以获取关于课程来源及作者的详细信息。如果您要编写自己的课程，\n"
"请参考 gtypist 使用手册，编写自己的课程是很简单的!\n"
"\n"
"如果您对 GNU Typist 有任何问题，欢迎在 gtypist 邮件列表发信询问。\n"
"邮件列表地址为 <bug-gtypist@gnu.org> (请使用英文发信)。"

#: src/infoview.c:228
msgid "Press SPACE or ENTER to start gtypist, or ESCAPE to disable this dialog"
msgstr "请按空格或回车键启动 gtypist，或按 Esc 键禁用此对话框"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:70
#, c-format
msgid "Raw speed|= %6.2f wpm"
msgstr "原始速度|= %6.2f 词/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:73
#, c-format
msgid "Raw speed|= %7.2f cpm"
msgstr "原始速度|= %7.2f 字符/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:76
#, c-format
msgid "Adjusted speed|= %6.2f wpm"
msgstr "已调整速度|= %6.2f 词/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:79
#, c-format
msgid "Adjusted speed|= %7.2f cpm"
msgstr "已调整速度|= %7.2f 字符/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:82
#, c-format
msgid "|with %.1f%% errors"
msgstr "|有   %.1f%%  的错误"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:85
#, c-format
msgid "Personal best|= %6.2f wpm"
msgstr "个人最佳成绩|= %6.2f 词/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:88
#, c-format
msgid "Personal best|= %7.2f cpm"
msgstr "个人最佳成绩|= %7.2f 字符/分"

#. TRANSLATORS: a '|' character in this message divides it in to two
#. * halves, which are aligned to the left and right sides of the dialog
#: src/speedbox.c:91
msgid "|new personal best"
msgstr "|新的个人最佳成绩"

#~ msgid "internal error in strdup"
#~ msgstr "内部错误: strdup"
