####################################################### # # This is a sample configuration file for pengfork # # TODO: comment each parameter # below a list of all paramaters with default value # access_method = modem # protocol = P3 # interface_type = tun # interface_name = # user = # pass = # auto_reconnect = no # reconnect_delay = 0 # daemon = no # debug_level = -1 # set_dns = yes # pid_file = /var/run/pengfork.pid # ip-up_script = /etc/pengfork/ip-up # ip-down_script = /etc/pengfork/ip-down # # modem_device = /dev/modem # rtscts = yes # initstr1 = ATZ # initstr2 = # initstr3 = # initstr4 = # initstr5 = # initstr6 = # initstr7 = # initstr8 = # initstr9 = # dialstr = ATDT # dial_prefix = # phone = # phone1 = # phone2 = # phone3 = # phone4 = # phone5 = # line_speed = 115200 # login_prompt = ogin: # server_pass_prompt = assword: # server_login = aol # server_pass = aol # server_connected = onnected # server_bad_passwd = assword # dial_retry = 3 # retry_delay = 0 # abort_busy = yes # abort_dialtone = yes # # aol_host = americaonline.aol.com # aol_port = 5190 # cable_iface = eth0 # connect_ip = 0.0.0.0